Entry Phone with Proximity Card Reader-Double Gang-Brass with Enhanced Weather Protection -EWP. The E-70 Series entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication. The E-70 also includes a built-in 125KHz HID compatible proximity card reader. The card reader outputs industry standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door controller or any controller compatible with 26-bit Wiegand format. The E-70's compact size allows it to be mounted in a standard double gang electrical box. The E-70 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-70 faceplates (PNL70) can be purchased separately and are available in all five standard finishes. The E-70 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E-70 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer. The E-70 features a built-in proximity card reader, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For outdoor installations where the unit is exposed to precipitation or condensation, the E-70 Series is available with Enhanced Weather Protection (EWP). For more information on EWP, see DOD# 859. Applications Door or gate communication, business delivery entrances Use with a Viking C-200 or C-250 to control one E-70 on a single phone line Use with a Viking C-2000B to control 1 to 4 E-70 s and door/gate control on a single phone line Use with a Viking ES-1 for proximity card reader door control Provide unique front and back door chimes and paging when used with a Viking SLP-1 or SLP-4 and C-2000B Residential, commercial and industrial door security Use with a Viking K-1900-5 or K-1900-30 for automatic speed dialing on telephone lines or analog PABX/KSU station ports Use on any analog PABX station port with programmable ringdown capability Features Built-in 125KHz HID compatible 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection Audio and video transmission on one CAT5E cable Compact size: Front panel is the size of a typical double gang midsize wall plate Mounting: Flush mounts in a double gang electrical box (2.25in deep x 3.65in wide x 2.84in tall minimum) or surface mounts in a Viking model VE-5x5 (not included, see DOD# 424) for mounting to a wall, post or VE-GNP Gooseneck Pedestal (EWP recommended) Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White PNL-70 faceplates: Replacement faceplates with matching screws available in all five standard finishes Vandal Resistant Features: 16 gauge polished brass or 18 gauge 304 stainless steel faceplate, 316 stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-70-SS 304 Stainless Steel faceplate) E-70-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information) Blue LED helps locate the push button, indicate ringing and off-hook Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out Selectable auto answer feature for monitoring VE-LIGHT: Optional faceplate light kit for use with the VE-5x5.