• Products
  • 2 Port Voip Gateway - (MVP210BG)
Product Code: MVP210BG
Inventory: Call for Inventory
Brand: Bogen
Height: 4 inches
Weight: 3 lbs
Depth: 13 inches
Width: 7 inches


2 Port Voip Gateway

Product Code: MVP210BG
Bogen s Voice Over IP gateways (Models MVP130BG, MVP210BG, MVP410BG, and MVP810BG) allow paging communications to be sent over the Internet or Intranet. FXS pass through expands the paging capabilities of Bogen s PCM zone paging system by providing a continuous connection between buildings using a Local-Area or Wide-Area Network (LAN/WAN). Bogen s VoIP gateways are available in models ranging from 1 to 8 ports. Each gateway connects directly to Bogen paging systems and equipment to provide overhead paging to all locations within a facility or across a campus without running new lines. The 1-port model supports FXS and FXO. Multi-port models support FXS, FXO, and provide contact closure Receive & Transmit in E&M mode. The VoIP gateways are easily managed locally using a Windows-based software application or remotely with a web browser or SNMP. Bogen s VoIP gateways can also be used for toll-free voice or fax communications when connected to phones,fax machines, key systems, PSTN lines, or a PBX to provide real-time, toll-quality voice connections to any office on your VoIP network. 1-, 2-, 4-, or 8- analog ports for communication over an existing IP network or the Internet Ethernet connectivity and full IP compatibility with existing routers and WAN infrastructure Overhead voice paging to multiple locations within a facility, nearby or branch office buildings, or to remote locations Single- or multi-zone paging at any or all locations when used with Bogen s Multi-Zone telephone paging interface (UTI312) Efficiently communicate company-wide emergency alerts or general announcements FXS/FXO connector on each port for direct connection to Bogen s telephone paging interfaces Configuration and management using a Web browser or Microsoft Windows Utilizes the H.323 or SIP protocols to provide complete interoperability with other Internet telephony solutions Multi-port models provide contact closure Receive & Transmit in E&M mode Connects directly to telephone or PBX Single Port Protocol (SPP) allows the use of dynamic IP addresses Voice compression to 5.3K bps per call with support for multiple algorithms, including ITU G.723 and G.729 Minimum requirements: Ethernet network, WAN connection, IP addresses Supports H.450 supplementary services to provide for call transfer, call forwarding, call hold, call waiting and name identification T.38 real-time fax relay for interoperability among other VoIP equipment PSTN fail-over automatically routes calls over the PSTN network if the IP network is down

Contact Us

Store Hours:
Mon - Fri
7am - 5pm (cst)

GoldCom, Inc.
141 BridgePoint Way
South St. Paul, MN 55075